فیلترها
SR2D201BD
- Simple ladder programming, adapted for non-specialists
- Discovery package, coming with Zelio Soft programming software: the simplest way to learn and use this relay
- Built-in EEPROM flash memory for data backup up to 10 years: easy-to-recover after a power shortage or incident
SR2D201FU
-
range of product Easy Altivar 610 product or component type Variable speed drive product specific application Fan, pump, compressor, conveyor device short name ATV610 variant Standard version product destination Asynchronous motors mounting mode Cabinet mount EMC filter Integrated conforming to EN/IEC 61800-3 category C3 with 50 m IP degree of protection IP20 type of cooling Forced convection supply frequency 50…60 Hz +/-5 % network number of phases 3 phases [Us] rated supply voltage 380…460 V – 15…10 % motor power kW 110 kW for normal duty 90 kW for heavy duty motor power hp 150 hp for normal duty 125 hp for heavy duty line current 201 A at 380 V (normal duty) 175.7 A at 460 V (normal duty) 170 A at 380 V (heavy duty) 149.1 A at 460 V (heavy duty) prospective line Isc 50 kA apparent power 140.0 kVA at 460 V (normal duty) 118.8 kVA at 460 V (heavy duty) continuous output current 211 A at 2.5 kHz for normal duty 173 A at 2.5 kHz for heavy duty maximum transient current 232 A during 60 s (normal duty) 260 A during 60 s (heavy duty) asynchronous motor control profile Variable torque standard Optimized torque mode Constant torque standard output frequency 0.0001…0.5 kHz nominal switching frequency 2.5 kHz switching frequency 1…8 kHz adjustable number of preset speeds 16 preset speeds communication port protocol Modbus serial option card Slot A: communication card, Profibus DP V1 Slot A: digital or analog I/O extension card Slot A: relay output card output voltage <= power supply voltage motor slip compensation Can be suppressed Adjustable Not available in permanent magnet motor law Automatic whatever the load acceleration and deceleration ramps Linear adjustable separately from 0.01 to 9000 s S, U or customized braking to standstill By DC injection protection type Thermal protection: motor Motor phase break: motor Thermal protection: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive frequency resolution Display unit: 0.1 Hz Analog input: 0.012/50 Hz electrical connection Control, screw terminal: 0.5…1.5 mm² Line side, screw terminal: 2 x 50…3 x 120 mm² Motor, screw terminal: 3 x 50…3 x 120 mm² connector type 1 RJ45 (on the remote graphic terminal) for Modbus serial physical interface 2-wire RS 485 for Modbus serial transmission frame RTU for Modbus serial transmission rate 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial type of polarization No impedance for Modbus serial number of addresses 1…247 for Modbus serial method of access Slave supply External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection local signalling 2 LEDs for local diagnostic 1 LED (yellow) for embedded communication status 2 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage width 320 mm height 852 mm 1159 mm with IP21 conformity kit depth 390 mm net weight 82 kg analogue input number 3 analogue input type AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits AI2, AI3 software-configurable temperature probe or water level sensor discrete input number 6 discrete input type DI1…DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) input compatibility DI1…DI6: logic input level 1 PLC conforming to EN/IEC 61131-2 DI5, DI6: pulse input level 1 PLC conforming to IEC 65A-68 discrete input logic Positive logic (source): DI1…DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1) Negative logic (sink): DI1…DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1) Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1) analogue output number 2 analogue output type Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits sampling duration 5 ms +/- 0.1 ms (AI1, AI2, AI3) – analog input 2 ms +/- 0.5 ms (DI1…DI6)configurable – discrete input 5 ms +/- 1 ms (DI5, DI6)configurable – pulse input 10 ms +/- 1 ms (AQ1, AQ2) – analog output accuracy +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output linearity error AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AQ1, AQ2: +/- 0.2 % for analog output relay output number 3 relay output type Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC isolation Between power and control terminals insulation resistance > 1 MOhm 500 V DC for 1 minute to earth noise level 76 dB conforming to 86/188/EEC power dissipation in W 2026 W(forced convection) at 380 V, switching frequency 2.5 kHz operating position Vertical +/- 10 degree electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 pollution degree 2 conforming to EN/IEC 61800-5-1 vibration resistance 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6 shock resistance 6 gn for 11 ms conforming to IEC 60068-2-27 relative humidity 5…95 % without condensation conforming to IEC 60068-2-3 ambient air temperature for operation -15…45 °C (without derating) 45…60 °C (with derating factor) operating altitude <= 1000 m without derating 1000…4800 m with current derating 1 % per 100 m environmental characteristic Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 standards EN/IEC 61800-3 Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 60721-3 marking CE Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 96.344 kg Package 1 Height 47 cm Package 1 width 67 cm Package 1 Length 103 cm
SR2E121B
- Simple ladder programming, adapted for non-specialists
- Discovery package, coming with Zelio Soft programming software: the simplest way to learn and use this relay
- Built-in EEPROM flash memory for data backup up to 10 years: easy-to-recover after a power shortage or incident
SR2E121BD
- Simple ladder programming, adapted for non-specialists
- Discovery package, coming with Zelio Soft programming software: the simplest way to learn and use this relay
- Built-in EEPROM flash memory for data backup up to 10 years: easy-to-recover after a power shortage or incident
SR2E121FU
- Simple ladder programming, adapted for non-specialists
- Discovery package, coming with Zelio Soft programming software: the simplest way to learn and use this relay
- Built-in EEPROM flash memory for data backup up to 10 years: easy-to-recover after a power shortage or incident
SR2E201B
- Extreme compactness
- Simple ladder programming, adapted for non-specialists
- Discovery package, coming with Zelio Soft programming software: the simplest way to learn and use this relay
- Built-in EEPROM flash memory for data backup up to 10 years: easy-to-recover after a power shortage or incident
- Flexible
SR2E201FU
- Simple ladder programming, adapted for non-specialists
- Discovery package, coming with Zelio Soft programming software: the simplest way to learn and use this relay
- Built-in EEPROM flash memory for data backup up to 10 years: easy-to-recover after a power shortage or incident
Range of product Zelio Logic Product or component type Compact smart relay local display Without Number or control scheme lines 0…240 with ladder programming
0…500 with FBD programmingCycle time 6…90 ms Backup time 10 years at 25 °C Clock drift 12 min/year at 0…55 °C
6 s/month at 25 °CChecks Program memory on each power up [Us] rated supply voltage 100…240 V AC Supply voltage limits 85…264 V Supply frequency 50/60 Hz Maximum supply current 100 mA at 100 V (without extension)
50 mA at 240 V (without extension)Power consumption in VA 11 VA without extension Isolation voltage 1780 V Protection type Against inversion of terminals (control instructions not executed) Discrete input number 12 Discrete input voltage 100…240 V AC Discrete input current 0.6 mA Discrete input frequency 57…63 Hz
47…53 HzVoltage state 1 guaranteed >= 79 V for discrete input Voltage state 0 guaranteed <= 40 V for discrete input Current state 1 guaranteed >= 0.17 mA (discrete input) Current state 0 guaranteed <= 0.5 mA (discrete input) Analogue input number 0 Input impedance 350 kOhm for discrete input Number of outputs 8 relay Output voltage limits 5…30 V DC (relay output)
24…250 V ACContacts type and composition NO for relay output Output thermal current 8 A for all 8 outputs for relay output Electrical durability AC-12: 500000 cycles at 230 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
AC-15: 500000 cycles at 230 V, 0.9 A for relay output conforming to EN/IEC 60947-5-1
DC-12: 500000 cycles at 24 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
DC-13: 500000 cycles at 24 V, 0.6 A for relay output conforming to EN/IEC 60947-5-1Switching capacity in mA >= 10 mA at 12 V (relay output) Operating rate in Hz 0.1 Hz (at Ie) for relay output
10 Hz (no load) for relay outputMechanical durability 10000000 cycles for relay output [Uimp] rated impulse withstand voltage 4 kV conforming to EN/IEC 60947-1 and EN/IEC 60664-1 Clock With Response time 50 ms with ladder programming (from state 0 to state 1) for discrete input
50 ms with ladder programming (from state 1 to state 0) for discrete input
50…255 ms with FBD programming (from state 0 to state 1) for discrete input
50…255 ms with FBD programming (from state 1 to state 0) for discrete input
10 ms (from state 0 to state 1) for relay output
5 ms (from state 1 to state 0) for relay outputConnections – terminals Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 25…AWG 14) semi-solid
Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 25…AWG 14) solid
Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) flexible with cable end
Screw terminals, 2 x 0.2…2 x 1.5 mm² (AWG 24…AWG 16) solid
Screw terminals, 2 x 0.25…2 x 0.75 mm² (AWG 24…AWG 18) flexible with cable endTightening torque 0.5 N.m Overvoltage category III conforming to EN/IEC 60664-1 Net weight 0.35 kg Immunity to microbreaks 10 ms Product certifications GL
GOST
CSA
UL
C-TickStandards EN/IEC 61000-4-3
EN/IEC 61000-4-11
EN/IEC 60068-2-6 Fc
EN/IEC 61000-4-2 level 3
EN/IEC 61000-4-12
EN/IEC 61000-4-4 level 3
EN/IEC 61000-4-5
EN/IEC 60068-2-27 Ea
EN/IEC 61000-4-6 level 3IP degree of protection IP20 (terminal block) conforming to IEC 60529
IP40 (front panel) conforming to IEC 60529Environmental characteristic EMC directive conforming to EN/IEC 61000-6-2
EMC directive conforming to EN/IEC 61000-6-3
EMC directive conforming to EN/IEC 61000-6-4
EMC directive conforming to EN/IEC 61131-2 zone B
Low voltage directive conforming to EN/IEC 61131-2Disturbance radiated/conducted Class B conforming to EN 55022-11 group 1 Pollution degree 2 conforming to EN/IEC 61131-2 Ambient air temperature for operation -20…40 °C in non-ventilated enclosure conforming to IEC 60068-2-1 and IEC 60068-2-2
-20…55 °C conforming to IEC 60068-2-1 and IEC 60068-2-2Ambient air temperature for storage -40…70 °C Operating altitude 2000 m Maximum altitude transport 3048 m Relative humidity 95 % without condensation or dripping water Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 6.5 cm Package 1 Width 13.3 cm Package 1 Length 9.9 cm Package 1 Weight 332.0 g Unit Type of Package 2 S03 Number of Units in Package 2 20 Package 2 Height 30.0 cm Package 2 Width 30.0 cm Package 2 Length 40.0 cm Package 2 Weight 7.14 kg
SR2MAN01DE
Range of product Zelio Logic Document purpose Programming on the smart relay Document type User manual Format Paper A5 bound language German Net weight 0.303 kg Warranty 18 months
SR2MEM01
Range of product Zelio Logic Accessory / separate part designation EEPROM memory cartridge Accessory / separate part type Memory cartridge accessory / separate part category Separate parts Accessory / separate part destination Net weight 0.01 kg Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 1.5 cm Package 1 Width 2.5 cm Package 1 Length 4.5 cm Package 1 Weight 6 g Unit Type of Package 2 S01
SR2MEM02
- Load the program functions developed with the software on smart relay
- Transfer the program and corresponding firmware from PC to the smart relay
- Compare the Smart relay data with the program, for firmware version byond version 3.0
- The transfer of data is secured with a password request
Range of product Phaseo
Zelio LogicAccessory / separate part designation EEPROM memory cartridge Accessory / separate part type Memory cartridge accessory / separate part category Separate parts Accessory / separate part destination For firmware version >= 3.0 Net weight 0.01 kg Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 1.5 cm Package 1 Width 3 cm Package 1 Length 4.5 cm Package 1 Weight 6 g Unit Type of Package 2 S01 Number of Units in Package 2 70 Package 2 Height 15 cm Package 2 Width 15 cm Package 2 Length 40 cm Package 2 Weight 599 g
SR2MOD01
-
Range of product Modicon M251
Modicon M221
Zelio Logic
Modicon M241Product or component type Analogue PSTN modem type of modem SIXNET VT-MODEM-5-WW Data backed up Flash memory kit composition Analogue PSTN modem
1 telephone cableFunction available Transfer program
Update firmware monitoring
Send alarm/receive instruction
Send alarm to e-mail addressNumber of messages 28 Electrical data recording Telephone/e-mail
Discrete and digital value
Date and time[Us] rated supply voltage 12…24 V DC Supply voltage limits 10…30 V Maximum supply current 140 mA at 12 V
70 mA at 24 V
9600 mAPower dissipation in W 1.7 W Electrical connection 1 cable Com-M specific to Zelio RS232 serial, specific Zelio communication protocol for link with the modem, AT commands
1 cable Com-Z specific to Zelio, specific Zelio communication protocol for Zelio Logic smart relays SR.B….. and SR2 E….. Version (>= V3.1)
Telephone cableCable length 2 m Insulation 1780 V optocoupler, connector type: Com-Z specific to Zelio
By the cable SR2 CBL07, connector type: Com-M specific to ZelioConnections – terminals Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) flexible with cable end
Screw terminals, 2 x 0.25…2 x 0.75 mm² (AWG 24…AWG 18) flexible with cable end
Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) semi-solid
Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) solid
Screw terminals, 2 x 0.25…2 x 1.5 mm² (AWG 23…AWG 16) solidTightening torque 0.5 N.m Net weight 0.265 kg Product certifications FCC part 15 standard
C-Tick
ACA TS
CTR21
GOST
UL
AS/NZS
CSAStandards EN/IEC 60068-2-27 Ea
EN/IEC 61000-4-5
EN/IEC 60068-2-6 FcElectromagnetic compatibility Conducted and radiated emissions class B group 1 conforming to EN 55022-11 IP degree of protection IP20 (terminal block) conforming to IEC 60529
IP40 (front panel) conforming to IEC 60529Environmental characteristic EMC directive conforming to EN/IEC 61000-6-2
EMC directive conforming to EN/IEC 61000-6-3
EMC directive conforming to EN/IEC 61000-6-4
EMC directive conforming to EN/IEC 61131-2 zone B
Low voltage directive conforming to EN/IEC 61131-2Pollution degree 2 conforming to EN/IEC 61131-2 Ambient air temperature for operation -30…70 °C Ambient air temperature for storage -40…85 °C Operating altitude 2000 m Maximum altitude transport 3048 m Relative humidity 5…95 % without condensation Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 6 cm Package 1 Width 14.5 cm Package 1 Length 15.3 cm Package 1 Weight 262 g
SR2MOD02
-
Range of product Zelio Logic Product or component type GSM modem type of modem Type quad band 900/1800 MHz, 850/1900 MHz Data backed up Flash memory kit composition GSM modem
Fixing on DIN rail (assembled with the GSM modem)
1 supply cable
1 antenna with cable
2 lugs for plate mountingFunction available Send alarm/receive instruction
Send alarm to e-mail address
Transfer program
Update firmware monitoringNumber of messages 28 Electrical data recording Telephone/e-mail
Discrete and digital value
Date and time[Us] rated supply voltage 12…24 V DC Supply voltage limits 5.5…32 V Maximum supply current 165 mA at 12 V
87 A at 24 V
2100 mA at 5.5 VPower dissipation in W 2.1 W Associated fuse rating 2.5 A Electrical connection 1 cable Com-M Com-M specific to Zelio RS232 serial, specific Zelio communication protocol for link with the modem, AT commands
1 antenna with cable
1 cable
1 cable Com-Z Com-Z specific to Zelio, specific Zelio communication protocol for Zelio Logic smart relays SR.B….. and SR2 E….. Version (>= V3.1)
Supply cableCable length 1.5 m supply cable
2.5 m antenna with cableInsulation 1780 V optocoupler, connector type: Com-Z specific to Zelio
By the cable SR2 CBL07, connector type: Com-M specific to ZelioConnections – terminals Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) flexible with cable end
Screw terminals, 2 x 0.25…2 x 0.75 mm² (AWG 24…AWG 18) flexible with cable end
Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) semi-solid
Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) solid
Screw terminals, 2 x 0.25…2 x 1.5 mm² (AWG 23…AWG 16) solidTightening torque 0.5 N.m Net weight 0.335 kg Product certifications UL
PTCRB
GOST
CSA
IC
FCC part 15 standard
C-TickStandards EN/IEC 60068-2-6 Fc
EN/IEC 60068-2-32Electromagnetic compatibility Conducted and radiated emissions class B group 1 conforming to EN 55022-11 IP degree of protection IP31 conforming to IEC 60529 Environmental characteristic Low voltage directive conforming to EN/IEC 60950-1
R and TTE directive conforming to ETSI EN 301419-1
R and TTE directive conforming to ETSI EN 301 489-7
R and TTE directive conforming to ETSI EN 301 511
EMC directive conforming to ETSI EN 301 489-1Pollution degree 2 conforming to EN/IEC 61131-2 Ambient air temperature for operation -20…55 °C conforming to IEC 60068-2-2
-20…55 °C conforming to IEC 60068-2-2Ambient air temperature for storage -40…70 °C Operating altitude 2000 m Maximum altitude transport 3048 m Relative humidity 0…95 % at 55 °C without condensation
0…95 % without condensation, during storageUnit Type of Package 1 Db Number of Units in Package 1 1 Package 1 Height 7.5 cm Package 1 Width 7.5 cm Package 1 Length 14.7 cm Package 1 Weight 318.0 g Unit Type of Package 2 Doboz Number of Units in Package 2 20 Package 2 Height 30.0 cm Package 2 Width 30.0 cm Package 2 Length 40.0 cm Package 2 Weight 6.895 kg