فیلترها
METSEPM2220
- Bill checking to verify that you are only charged for the energy you use
- Aggregation of energy consumption and cost allocation within the same facility
- Energy cost and usage analysis to optimise energy usage
- Metering of electrical parameters to understand your electrical distribution system
Range EasyLogic Product name EasyLogic PM2200 Device short name PM2220 Product or component type Power meter Device application Power monitoring
Sub billingPower quality analysis Total harmonic distortion
up to the 15th harmonicType of measurement Apparent power min/max, total
Active and reactive power min/max, total
Current min/max, avg
Voltage min/max, avg
Frequency min/max, avg
Total current harmonic distortion THD (I) per phase
Total voltage harmonic distortion THD (U) per phase
Power factor min/max, avg
Apparent energy total
Active and reactive energy totalMetering type Active, reactive, apparent energy (signed, four quadrant)
Current I, I1, I2, I3
Peak demand currents
Peak demand power PM, QM, SM
Unbalance current
Active power P, P1, P2, P3
Reactive power Q, Q1, Q2, Q3
Demand power P, Q, S
Voltage U, U21, U32, U13, V, V1, V2, V3
Apparent power S, S1, S2, S3
Calculated neutral currentAccuracy class Class 1 active energy conforming to IEC 62053-21
Class 1 reactive energy conforming to IEC 62053-24
Class 5 harmonic distorsion (I THD & U THD)Measurement accuracy Apparent power +/- 1 %
Active energy +/- 1 %
Reactive energy +/- 1 %
Active power +/- 1 %
Voltage +/- 0.5 %
Power factor +/- 0.01
Current +/- 0.5 %
Frequency +/- 0.05 %Measurement current 5…6000 mA Measurement voltage 35…480 V AC 50/60 Hz between phases
20…277 V AC 50/60 Hz between phase and neutral
480…999000 V AC 50/60 Hz with external VTFrequency measurement range 45…65 Hz [Us] rated supply voltage 44…277 V AC 45…65 Hz +/- 10 %
44…277 V DC +/- 10 %Network frequency 50 Hz
60 HzRide-through time 100 ms 120 V AC typical
400 ms 230 V AC typical
50 ms 125 V DC typical[In] rated current 1 A
5 AMaximum power consumption in VA 6 VA at 277 V AC Maximum power consumption in W 3.3 W (power lines (AC))
2 W at 277 V (power lines (DC))input impedance Current (impedance <= 0.3 mOhm)
Voltage (impedance > 5 MOhm)Tamperproof of settings Protected by access code Display type Backlit LCD Display colour Monochrome Display resolution 128 x 128 pixels Demand intervals Configurable from 1 to 60 min Information displayed Demand current (past value)
Demand current (present value)
Demand power (past value)
Demand power (present value)
Voltage
Current
Frequency
Energy consumption
Harmonic distortion
Power factor
Active power
Apparent power
Reactive power
Unbalanced in %
Harmonic amplitudeControl type 4 x button Local signalling Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh)
Green LED: module operation and integrated communicationNumber of inputs 0 Number of outputs 0 Communication port protocol Modbus RTU at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none – 2 wires, insulation 2500 V Communication port support Screw terminal block: RS485 Data recording Time stamping
Min/max for 8 parametersFunction available Real time clock Sampling rate 64 samples/cycle Cybersecurity Enable/disable communication ports Communication service Remote monitoring language Spanish
French
English
Russian
Portuguese
German
ChineseProduct certifications CE conforming to IEC 61010-1
CULus conforming to UL 61010-1
CULus conforming to CSA C22.2 No 61010-1
RCM
EAC
C-TickMounting mode Clip-on Mounting position Vertical Mounting support Framework Provided equipment 1 x installation guide Measurement category Category III 480 V
Category II 480…600 VElectrical insulation class Double insulation
Class IIFlame retardance V-0 conforming to UL 94 Connections – terminals Current transformer: screw connection (bottom) 6
Voltage inputs: screw connection (top) 4Material Polycarbonate Width 96 mm Depth 76.09 mm total:
61.64 mm embedded:Height 96 mm Net weight 300 g Compatibility code PM2220 Service life 7 year(s) IP degree of protection IP54 front: conforming to IEC 60529
IP30 body: conforming to IEC 60529Relative humidity 5…95 % at 50 °C Pollution degree 2 Ambient air temperature for operation -10…60 °C Ambient air temperature for storage -25…70 °C Operating altitude <= 2000 m Electromagnetic compatibility Electrostatic discharge conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4
Surge immunity test conforming to IEC 61000-4-5
Conducted RF disturbances conforming to IEC 61000-4-6
Magnetic field at power frequency conforming to IEC 61000-4-8
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Emission tests conforming to FCC part 15 class AOvervoltage category III Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 8.9 cm Package 1 Width 12.2 cm Package 1 Length 11.7 cm Package 1 Weight 270 g